roulements à billes à contact oblique

Contacter maintenant

Due to their internal design, angular contact ball bearings can withstand high radial-axial loads and reach high speeds. They are asymmetrical for manufacturing reasons and can withstand unidirectional axial loads only. Angular bearings are usually mounted in a group of two or more opposed preloaded units with rigid or elastic spacers. Typically, the inner and outer raceways and balls are made of chrome steel. Where operating conditions are severe, bearings may have ceramic balls creating a hybrid bearing.

 

Angular contact ball bearings manufactures super-precision angular contact ball bearings for shaft diameters from 6 to 360 mm. Application requirements vary, and as a result, the assortment of super-precision angular contact ball bearings includes four ISO dimension series.Double-row angular contact ball bearings are units with solid inner and outer rings and ball and cage assemblies with polyamide, brass or sheet-steel cages. Their construction is similar to a pair of single-row angular contact ball bearings in an O arrangement, but they are narrower to a certain extent.

 

75 mm x 115 mm x 20 mm NTN 7015UP4 roulements à billes à contact oblique

1,17 Kg ISB
30x78x54.1 78

55 mm x 80 mm x 13 mm SNFA VEB 55 /NS 7CE3 roulements à billes à contact oblique

ISO 115
560 820

Toyana 7203 C-UX roulements à billes à contact oblique

713660050 VOLVO / 480 / engin
6516 VKBA 1495

ILJIN IJ132023 roulements à billes à contact oblique

482E/472 69.85x120x46.751
46,751 Fersa

30 mm x 47 mm x 9 mm SNFA VEB 30 7CE3 roulements à billes à contact oblique

KOYO 85,1 kN
31.75 mm 0,27

120 mm x 165 mm x 22 mm SKF 71924 ACD/P4AH1 roulements à billes à contact oblique

0,059 Kg 22
29 23,3 kN

ISO 7321 ADT roulements à billes à contact oblique

20 mm ISO
38 mm 45

95 mm x 145 mm x 24 mm SNFA VEX 95 /S 7CE1 roulements à billes à contact oblique

180 mm 100 mm
382 kN 461 kN
1/11